Espero by Viper

This place is for those who don't speak Czech

Moderátor: Blue Lanos

ViperZG
Příspěvky: 13
Registrován: pon říj 22, 2007 00:03

Espero by Viper

Příspěvek od ViperZG »

Hi, my name is Vedran , I am from Croatia and I drive a 97' Daewoo Espero

So here it is..

it was like this before I got my hands on it

Obrázek

Obrázek

I bought some new rims, from factory 185/65/14 I went to 215/35/18

Obrázek

I had to put some track spacers on the rear axle , 2cm on each side

Obrázek

Obrázek
but then it was normaly very high , it looked like a monster truck
so , I ordered Eibach springs -30mm for it, but by mistake they gave me -30mm for Nexia , and it lowered the front about 70mm and the rear about 40mm , I was very pleased

Obrázek

Obrázek

Obrázek

Obrázek

that was it for a while..

then the project started

because of the big rims, the rear brakes looked silly , so I got the rear axle from a Vectra 2.0

first I dissasembeled it..because it was rusty and didn't work ..

Obrázek
By ViperZG

I got rid of all the rust and painted it in mat black

Obrázek
By ViperZG

the callipers were repaired , fitted with new parts..

Obrázek
By ViperZG

old vs. new discs

Obrázek
By ViperZG

new discs painted in mat black

Obrázek
By ViperZG

all new parts fitted and assembeled

Obrázek
By ViperZG

old vs. new axle

Obrázek
By ViperZG

after a while driving and parking , I scratched a rim , so I decided to repair them and paint them

painted the inside in mat black

Obrázek
By ViperZG

very carefully I had to tape the rim to be painted

Obrázek
By ViperZG

the rims repaired and painted

Obrázek
By ViperZG

on the car with the new disc

Obrázek
By ViperZG

then it was the cars turn, so I started do take it apart

Obrázek
By ViperZG

Obrázek
By ViperZG

Obrázek
By ViperZG

and ready for some bodywork

Obrázek
By ViperZG

Obrázek
By ViperZG

Obrázek
By ViperZG

progress

all the signes are removed from the car, the frot is given a bad look , the rear is changed , rust is fixed , fenders are pulled out etc.

Obrázek
By ViperZG

Obrázek
By ViperZG

and the new rear spacers, 3cm per side

Obrázek
By ViperZG

Obrázek
By ViperZG

the front bad look

Obrázek
By ViperZG

Obrázek
By ViperZG

Obrázek
By ViperZG

Obrázek
By ViperZG

Obrázek
By ViperZG

and finally ready for a little trip

Obrázek
By ViperZG

Obrázek
By ViperZG

The car was then driven 100km like that

The custom front and rear bumper are being made at the moment , as well as the custom sideskirts and rear wing, I expect it to be finished and painted by the end of the week, so till the next report ...
Reklama
 

Uživatelský avatar
Ivoš
Příspěvky: 5567
Registrován: pát pro 01, 2006 08:52
Bydliště: Pardubice,CZ
Kontaktovat uživatele:

Příspěvek od Ivoš »

Taht looks great. Good work...your wheels are excelent ;)
Chevrolet Spark 1.0 LS, r.v.2010, klima atd., tmavě hnědá metalíza
ViperZG
Příspěvky: 13
Registrován: pon říj 22, 2007 00:03

Příspěvek od ViperZG »

C/P from other forums..

here is a preview pic of the front bumper..

Obrázek
By ViperZG


Its being painted at the moment , i HOPE it will be completed by saturday 77000000.gif

hope you like it

Obrázek
By ViperZG

Obrázek
By ViperZG

Obrázek
By ViperZG

Obrázek
By ViperZG

And here are some new pics

They were taken 5 minutes after I brought it home, so please dont tell me that the parts "dont fit" because I know..they were onli put on the car for the photos, I will assemble it tommorow..

Obrázek
By ViperZG

Obrázek
By ViperZG


Obrázek
By ViperZG



and the exhaust

Obrázek
By ViperZG

Obrázek
By ViperZG

the diffuser will be paintet in mat black on tuesday , or wednesday, and then I will put the exhaust on drunk.gif
-peha-
Příspěvky: 9225
Registrován: stř říj 04, 2006 18:33
Bydliště: Rožňava-SR,pôvodne Teplice-CZ
Kontaktovat uživatele:

Příspěvek od -peha- »

Téda páni Esperáci tečú vám slinky há :lol: :lol: :lol:
je to fakt parádný kúsokObrázekObrázekObrázek
ViperZG
Příspěvky: 13
Registrován: pon říj 22, 2007 00:03

Příspěvek od ViperZG »

in english please :roll:

can someone translate that , pleas? ;)
Uživatelský avatar
conpet
Příspěvky: 3598
Registrován: čtv dub 21, 2005 22:59
Bydliště: Jaroměř
Kontaktovat uživatele:

Příspěvek od conpet »

-peha- píše:Téda páni Esperáci tečú vám slinky há :lol: :lol: :lol:
je to fakt parádný kúsokObrázekObrázekObrázek
Tohle je paráda :!:

Obrázek

Tohle už je trochu mimo, ztratilo to Bertoneho duši.
Je to jen můj názor, Ivoši prosím přelož mu to, díky :)

Obrázek
Megane Grandtour ,Chevy Trax diesel automat
Sen- http://www.youtube.com/watch?v=mhAT0Bm1gjg&feature=related
Jde o politováníhodný omyl, který se stává maximálně dvakrát za deset let.
Přéčinó bela chebná elektronka E13 z našeho podniko Katoda Olomóc.
80% mozku tvoří kapalina u některých brzdová
Uživatelský avatar
JRD McLAREN
Příspěvky: 3598
Registrován: ned říj 10, 2004 20:09
Bydliště: Mexico City
Kontaktovat uživatele:

Příspěvek od JRD McLAREN »

Nice one...

but I think, then I see this one foto before..
Obrázek
..
and I can't remeber where....:mrgreen:

Obrázek
Obrázek

just tell something more about the engine and suspensions.. :arrow:
IMF Master Ignition Forum - http://imfsoft-forum.eu//
Opravy vašich plechových miláčikov
ViperZG
Příspěvky: 13
Registrován: pon říj 22, 2007 00:03

Příspěvek od ViperZG »

Here are some new pics , the car still isnt finnished , I have to do a few things on the outside , a few details that will complete the car..

and the bumpers still arent fixed properly , i will do that tommorow..

Obrázek
By ViperZG

Obrázek
By ViperZG

Obrázek
By ViperZG

Obrázek
By ViperZG

Obrázek
By ViperZG

Obrázek
By ViperZG

Obrázek
By ViperZG

Obrázek
By ViperZG

Obrázek
By ViperZG

Obrázek
By ViperZG

Obrázek
By ViperZG

Obrázek
By ViperZG

Obrázek
By ViperZG
Uživatelský avatar
Goose
Příspěvky: 3947
Registrován: pát pro 15, 2006 22:38
Bydliště: Praha 8
Kontaktovat uživatele:

Příspěvek od Goose »

Very nice...good work... ;)
Nikdy neříkej, že něco nejde, protože se vždycky najde nějakej iniciativní blbec, kterej neví, že to nejde a udělá to...
-peha-
Příspěvky: 9225
Registrován: stř říj 04, 2006 18:33
Bydliště: Rožňava-SR,pôvodne Teplice-CZ
Kontaktovat uživatele:

Příspěvek od -peha- »

ObrázekObrázekObrázekObrázekObrázekObrázekObrázek
Uživatelský avatar
Ivoš
Příspěvky: 5567
Registrován: pát pro 01, 2006 08:52
Bydliště: Pardubice,CZ
Kontaktovat uživatele:

Příspěvek od Ivoš »

:shock: Is it Espero yet? It looks heavy!!! Very nice work, bro ;)
Chevrolet Spark 1.0 LS, r.v.2010, klima atd., tmavě hnědá metalíza
Uživatelský avatar
Hanzy
Příspěvky: 7197
Registrován: ned led 21, 2007 13:16
Bydliště: Frýdek-Místek - Baška/Hodoňovice/Velké Karlovice

Příspěvek od Hanzy »

Jednim slovem PARADA!!! :D
Alhambra+Sharan 4x4 klepotřepčmoud Taxi Valach
VW Transporter T4 2.5 TDI klepačotřepočmoud
Captiva 3.2 V6 LPG
Opel Combo CNG
Evanda 2.0 CDX LPG - už ji prohání brácha
CRUZE 1.6 LS+ moja na kolem chalupy od 9/2016 LPG
Ex Captiva zlatá metla 2.0 klepočmoud rachotila šla pryč
Ex Leganza 2.0 CDX LPG
Uživatelský avatar
Ivoš
Příspěvky: 5567
Registrován: pát pro 01, 2006 08:52
Bydliště: Pardubice,CZ
Kontaktovat uživatele:

Příspěvek od Ivoš »

For Viper: Hanzy says that your car is simply great!
Chevrolet Spark 1.0 LS, r.v.2010, klima atd., tmavě hnědá metalíza
Uživatelský avatar
faczko76
Příspěvky: 568
Registrován: úte črc 03, 2007 23:19
Kontaktovat uživatele:

Příspěvek od faczko76 »

Very,very good work! Congratulations! -i -i -i
Š 100 / Š 125 L / Š 120 / Š 136 GL / Daewoo Nexia sedan / Citroën Berlingo
_______________________________________
<a href="http://www.spritmonitor.de/en/detail/213805.html" target="_blank"><img src="http://images.spritmonitor.de/213805_5.png" alt="Spritmonitor.de" border="0"></a>
ViperZG
Příspěvky: 13
Registrován: pon říj 22, 2007 00:03

Příspěvek od ViperZG »

thanks everyone ;)
Odpovědět

Zpět na „English Corner“